router rip network 192.168.1.0 network 192.168.3.0 version 2 router rip network 192.168.1.0 network 192.168.3.0 version 2

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/04 17:03:44
router rip network 192.168.1.0 network 192.168.3.0 version 2 router rip network 192.168.1.0 network 192.168.3.0 version 2

router rip network 192.168.1.0 network 192.168.3.0 version 2 router rip network 192.168.1.0 network 192.168.3.0 version 2
router rip network 192.168.1.0 network 192.168.3.0 version 2
router rip network 192.168.1.0 network 192.168.3.0 version 2

router rip network 192.168.1.0 network 192.168.3.0 version 2 router rip network 192.168.1.0 network 192.168.3.0 version 2
起用RIP动态协议,宣告192.168.1.0 和192.168.3.0 网段,RIP版本为2

tyoui[ioyjrtu7rtityo

router rip network 192.168.1.0 network 192.168.3.0 version 2 router rip network 192.168.1.0 network 192.168.3.0 version 2 CCNA题库中的一道题,我想知道选项E为什么不对?183.Which series of commands will configure router R1 for LAN-to-LAN communication with router R2?The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP.(Choo CCNA 的计算题Router 1 : IP address 10.2.0.0/16 S0/0/0 192.168.0.1Router 2 : IP address 172.16.0.0/16 S0/0/0 192.168.0.2Router1 and Router2 are running the RIPv1 protocol. The network administrator configures the command network 10.1.0.0 on Router 请问以下语句有什么作用 router rip no auto-summary network 10.1.1.0 255.255.255.0在路由器上是不是配置了这几条语句后,路由器就会自动学习到其它路由信息而不需要配置静态路由什么的?我是刚刚学路 Ruijie(config-router)# network 200.168.23.0 这里的NETWORK是什么意思?我看到有人说是NETWORK是声明网络, Router(config-router)#redistribute eigrp 10 metric 1 中的(metric 英语翻译Select gateway in which the router will function,enable the dynamic routing feature,set RIP send packet version and RIP recv packet version to RIPv2 .Enable wireless connection control,and allow only 25 specific client devices to connect 英语翻译Quality of service is managed by proper engineering of the IP network and limiting router hops.For such products a local IP network has advantages in bandwidth and delay over a larger network. network 3.3.3.0 0.0.0.255 area router ospf 10 network 3.3.3.0 0.0.0.255 area 0 network 23.0.0.0 0.0.0.3 area 0以上是ospf配置的几条基本命令,area0具体指什么? NETWORK 英语翻译QUESTION 121The network is converged.After link-state advertisements are received from Router A,what information will Router E contain in its routing table for the subnets 208.149.23.64 and 208.149.23.96? 英语翻译to display the MTU values for each router in a specified network path from source to a destination与网络有关的. a network administrator views the output from the show ip route command.a network that is advertised by both rip and igrp appears in the routing table flagged as an igrp route.why is the rip route to this network not used in the routing table?A.igrp a network administrator views the output from the show ip route command.a network that is advertised by both rip and igrp appears in the routing table flagged as an igrp route.why is the rip route to this network not used in the routing table?A.igrp 1.What are two reasons that a network administrator would use access lists?(Choose two.)A.to control vtyaccess into a router B.to controlbroadcast traffic through a router C.to filtertraffic as it passes through a router D.to filter trafficthat origi rip是什么意思 rip 是什么意思? rip是什么意思